Passaggio 1

Scarica il file di configurazione OpenVPN (file .ovpn).

File OpenVPN (.ovpn): NASCOSTO. Accedi o registrati per visualizzarlo.

Passaggio 2

Install packages required for OpenVPN connection.

Run following command in command line:

sudo pacman -S openvpn

Passaggio 3

Create OpenVPN connection using downloaded ovpn file

- Right click the Network Manager on the menu bar

    - and click "Edit Connections..."

    - then click "Add"

    - choose "Import a saved VPN configuration..." for the connection type from the drop down menu

    - then click "Create..."

    - navigate to downloaded ovpn file and select it

    - then click "Open"

    - Remove only the ":1194" from the "Gateway:" ( if present ) as only the domain name should be in this box

    - for the "User name:" type in your VPN user from Manual Setup page

    - for the "Password:" type in the VPN password from Manual Setup page

    - Then click "Advanced..."

    - Check "Use custom gateway port:" and set it to "1194"

    - Click on the "Security" tab

    - Set the "Cipher:" to "AES-256-CBC"

    - Set the "HMAC Authentication:" to "SHA512"

    - Click "OK"

    - Click "Save"

Passaggio 4

Trust.Zone VPN does not support IPv6 so you need to disable IPv6 to prevent IPv6 leak.

On the following Wiki page you can find instructions on how to disable IPv6: https://wiki.archlinux.org/title/IPv6

Verifica della connessione

Apri la pagina principale di Trust.Zone, oppure ricaricala se è già aperta, per verificare che la connessione a Trust.Zone VPN sia stata stabilita correttamente.
Puoi anche visitare la nostra pagina di verifica della connessione.