Cómo configurar una conexión VPN para Mac OS X con L2TP/IPSec. Manual de la VPN Trust.Zone

Paso 1

Click on "System Preferences…".

Paso 2

In the section "Internet & Wireless" click on "Network".

Paso 3

Click on "+".

Paso 4

Click on the "Interface" dropdown menu and choose "VPN"

Click on the "VPN Type" dropdown menu and choose "L2TP over IPSec"

Set the Service Name to "Trust.Zone-VPN", then click on "Create".

Trust.Zone-VPN

Paso 5

Set as "Server Address": vpn.trust.zone. Under "Account Name" enter OCULTO. Entre o Regístrese para ver.. Afterwards click on "Authentication Settings…".

Trust.Zone-VPN vpn.trust.zone

Paso 6

Under "Password" enter OCULTO. Entre o Regístrese para ver.. The "Shared Secret" is: trustzone.
Afterwards click on "OK".

Trust.Zone-VPN trustzone

Paso 7

Click on "Advanced...".

Trust.Zone-VPN vpn.trust.zone

Paso 8

Check "Send all traffic over VPN connection". Then click on "OK".

Trust.Zone-VPN

Paso 9

Click on "Apply".

Trust.Zone-VPN vpn.trust.zone

Paso 10

Click on "Connect".

Trust.Zone-VPN vpn.trust.zone

Paso 11

If connection has been successfully established, the status is shown in the menu bar. You can manage your VPN connection in the network settings.

Trust.Zone-VPN vpn.trust.zone

Connection check

Open Trust.Zone Main page or reload it if it is already open in order to check if your connection with Trust.Zone VPN is established correctly.
You can also visit our Connection Check Page.

Tu IP: x.x.x.x · Canadá · ¡Estás en TRUST.ZONE ahora! ¡Tu verdadera localización está oculta!